Polycom 6000 Manuale Utente Scaricare il pdf (Pagina 88)

Administrator Guide for Polycom QDX 6000 System

9 - 2

To access the system using the Polycom QDX 6000 web interface:

1. On a computer, open a web browser.

2. In the browser address line, enter the system’s host name or IP address,

for example,

http://10.11.12.13

, to go to the Polycom QDX 6000 web

interface.

If Security Mode is enabled on the system, you must use secure HTTPS

access, for example,

https://10.11.12.13

. Click Yes in the security

dialog boxes that appear.

3. If prompted, enter the administrator account ( “admin” is default), and

enter the remote access password.

Monitoring a Room or Call with the Polycom QDX 6000 Web Interface

The monitoring feature within the Polycom QDX 6000 web interface allows

administrators of Polycom QDX 6000 systems to view a call or the room where

the system is installed.

To enable room and call monitoring:

1. Go to System > Admin Settings > General Settings > Security >

Security Settings.

2. Select > > and enable Allow Video Display on Web to allow

the room or call to be viewed remotely.

To view a room or call:

1. On a computer, open a web browser.

2. In the browser address line, enter the system’s IP address, for example,

http://10.11.12.13

, to go to the Polycom QDX 6000 web interface.

3. Go to Utilities > Web Director.

4. Perform any of the following tasks:

— Place or end a call

— View near and far sites

— Change camera sources

— Adjust camera position

— Zoom cameras

— Adjust system volume settings

— Mute and unmute the microphones

You can view near and far sites without opening Web Director by selecting

Tools > Remote Monitoring.

1 2 ... 83 84 85 86 87 88 89 90 91 92 93 ... 125 126

Nessun commento

Polycom 6000 Manuale Utente Pagina 88