Polycom 6000 Manuale Utente Scaricare il pdf (Pagina 79)

Security

8 - 5

Security Mode requires secure access and a password for Web access.

When you enable Security Mode, the following settings are set and controlled

by the system:

To configure the system to use Security Mode:

1. Go to System > Admin Settings > General Settings > Security >

Security Settings.

2. Enable Security Mode.

When you change this setting, the Polycom QDX 6000 system restarts. Every

time a Polycom QDX 6000 system is powered on or restarts in Security Mode,

it verifies that the system software is authentic Polycom software.

Setting Restriction

AES Encryption Set to Required for Video Calls Only (or When

Available after an upgrade), configurable

Enable Remote

Access: Telnet

Disabled for port 23 and 24, read-only

Enable Remote

Access: SNMP

Disabled, read-only

Web Access Port Port 80 disabled with no redirect to port 443, read-only

Port 443: Available for HTTPS, read-only

Allow Video Display

on Web

Disabled, configurable

Auto Answer

Settings

Auto Answer Point-to-Point: Disabled, configurable

User Settings Mute Auto-Answer Calls: Hidden

Allow Video Display on Web: Hidden

Far Control of Near Camera: Hidden

Minimum Password

Length

Set to 1, must be at least 1

1 2 ... 74 75 76 77 78 79 80 81 82 83 84 ... 125 126

Nessun commento

Polycom 6000 Manuale Utente Pagina 79