Polycom V2IU Manuale Utente Scaricare il pdf (Pagina 44)

User Guide V

IU 6400-S Converged Network Appliance

6 - 2

To configure basic settings:

1. In the navigation pane, select Firewall.

2. In the section: Basic LAN and WAN Firewall Settings, enable the

management services that you want to reach the 6400-S by checking the

appropriate box for:

— Allow HTTP access through firewall

— Allow TELNET access through firewall

— Allow SSH access through firewall

— Allow SNMP access through firewall

3. Configure Allow TCP Port according to the rules in "Basic settings rules"

on page 31. This setting allows traffic with the specified TCP port to

terminate on the 6400-S.

4. Configure Allow UDP Port according to the rules in Basic settings rules

on page 6-3. This setting allows traffic with the specified UDP port to

terminate on the 6400-S.

5. Skip Enable PPTP server Pass-through. This setting is not currently used.

6. Enter an IP address in PPTP Server IP Address. This setting is not

currently used.

7. To restrict Trusted Management to the Management Interface, see

Configuring a management interface on page 7-9.

8. Press Submit.

1 2 ... 39 40 41 42 43 44 45 46 47 48 49 ... 81 82

Nessun commento

Polycom V2IU Manuale Utente Pagina 44