Polycom Webcam Manuale Utente Scaricare il pdf (Pagina 71)

100

101

Chapter 3 - Initial System Setup

Setting Video Network Options

Use the Video Network screen to set the parameters for your

V.35/RS-449/RS-530 video network.

Figure 3-6. Video Network Screen

You can set the following options on this screen:

❑ RS-366 Dialing—Enable this option if you want to call from the

system through the DCE connection to the far-end

videoconferencing system. Disable this option if you are using

your DCE to dial the call or if you have a dedicated connection

to the far site.

Note

If the RS-366 Dialing option is enabled, you need to select

Dialing Speeds on this screen (see the following Selecting

Dialing Speeds section).

❑ V.35 Ports Used—Select 1 if you are placing only 1-channel calls.

Select 1+2 if you are placing 2 x 56 Kbps or 2 x 64 Kbps channel

calls.

❑ Dialing Protocol—RS-366 appears as the dialing protocol if the

RS-366 Dialing option is enabled. If the RS-366 Dialing option

is disabled, the Dialing Protocol does not appear.

❑ Broadcast Mode—Enable or disable H.331 Broadcast Mode if

the system is connected to the network via satellite.

1 2 ... 66 67 68 69 70 71 72 73 74 75 76 ... 355 356

Commenti su questo manuale

Nessun commento

Polycom Webcam Manuale Utente Pagina 71

Commenti su questo manuale

Prodotti e manuali riguardandi Accessori per computer Polycom Webcam